品牌：UD優道

產品編號：UD-247/1.5G

企業標準：Q/YK 058-2012

僅供4S店使用

產品特點：

1、在摩擦表面上生成金屬陶瓷層，恢復或者優化零部件之間的配合精度；

2、能夠恢復活塞環的幾何密封性；提高并均衡各氣缸的壓力；

3、修復各摩擦部件的磨損并防止其繼續磨損；

4、減少發動機的噪音和振動嗎、降低燃油消耗、提高發動機功率、降低尾氣中CO和HC的含量；

5、提升機油壓力，延長發動機使用壽命；可與各種機油相溶。

使用方法：

1、預熱發動機，到正常溫度，然后關閉發動機；

2、打開發動機機油口蓋，將優道缸壓修復劑從機油口擠入，然后蓋好機油口蓋；

3、啟動發動機，怠速5分鐘；

4、正常行駛。當累計行駛50小時（或者1500公里），處理完成。

5、若需測試缸壓變化，請怠速運轉30分鐘，運行500公里后測試效果更佳。

Product features:

1. Generate metal ceramic layer on the friction surface to restore or optimize the coordination precision between parts;

2. Can restore the geometric sealing of piston ring; Increase and balance the pressure of each cylinder;

3. Repair and prevent the wear and tear of all friction parts;

4. Reduce the noise and vibration of the engine, reduce fuel consumption, increase engine power, and reduce the content of CO and HC in tail gas;

5. Increase the oil pressure and extend the service life of the engine; It can dissolve with various oil.

Usage:

1. Preheat the engine to normal temperature and then close the engine;

2. Open the oil cap of the engine, and squeeze the pressure restorer of the cylinder into the oil port of the engine, then cover the oil cap;

3. Start the engine and idle for 5 minutes;

4. Drive normally. When traveling for a total of 50 hours (or 1,500 kilometers), the handling is complete.

5. If the cylinder pressure change needs to be tested, please idle for 30 minutes, and the test effect will be better after running 500 kilometers.